Vector MAXX SST VEC049C Manual do Proprietário

VEC049FRONT4140 S.W. 28TH WAY • FT. LAUDERDALE, FL 33312TEL 954.584.4446 • FAX 954.584.5556TOLL-FREE: (866) 584-5504OWNER’S MANUALTHIS MANUAL CONTAINS

The 110 VAC output of the inverter is in the form of a modified sine wave(MSW) as shown in FIGURE 5. This type of waveform has the same energycharacte

CAUTIONS:This device supplies 110 VAC electrical power directly to the appliancesthrough three standard, North American U-ground receptacles. NEVER tr

APPLIANCE AMPS@ WATTS@110VAC 110VACCOMPUTER AND MONITOR 4 450PORTABLE VACUUM 4.6 5408-CUP COFFEE MAKER 5.5 650ELECTRIC TRIMMER 5.5 6601/2" HAMMER

5.0 INSTALLATIONThe inverter will provide you with up to 1000 watts of continuous, elec-trical power (2000 watts peak) at 110 VAC when powered by a 1

4.3 BATTERY OPERATING TIMEFIGURE 6 is a set of curves that show how appliance load in watts or inamperes affects operating time. These curves are onl

IMPORTANT SAFETY INFORMATIONTo ensure reliable service, your power inverter must be installed and usedproperly. Please read the installation and opera

The customer is responsible for the shipping charges on all returned items.During the warranty period, Vector Manufacturing, Ltd. will be responsiblef

1.0 INTRODUCTIONYour new Vector MAXX SST 1000 inverter is one in a series of the most advanced DC to AC inverters available. With proper care and ap

8.2 TROUBLESHOOTING GUIDETROUBLE/ INDICATION POSSIBLE CAUSE SUGGESTED REMEDYNo AC output – DC input below 10 Volts Recharge or replacered LED lit b

1.2 MAXX SST 1000 SAFETY FEATURESBUILT-IN SAFETY FEATURES INCLUDE: • Automatic overload and over-temperature shutdown activated if AC output exceeds

17. Check to ensure that all electrical connections are tight.18. Ensure that the inverter’s ON/OFF switch is OFF.19. Insert the fuse into the fuse ho

2.0 INVERTER APPLICATIONSAside from issues of supplying power to higher wattage appliances,inverters must be supplied with a constant source of high

The inverter can be operated in any position, however, if it is to bemounted on a wall, mount it horizontally so that indicators, switches,outlets and